Magento 2 Private Sales & Flash Sales v4.x Configuration

Step-by-Step action:

1. Go to “Plumrocket” tab in the main menu > select “Private Sales and Flash Sales” extension.
2. Select “Configuration” section.
3. Option “Enable Extension”: allows to enable or disable flash sales module.
4. Option “Serial Key”: enter unique serial key provided after the purchase for legitimate and proper functioning of your extension. Note: In most cases this field will be pre-filled with serial key automatically and the green check mark will be displayed. Otherwise please read article Serial Key Activation in order to find and paste your serial key manually.
5. Option “Display Products Before Event Starts”: lets you display or hide products before the sales event starts.
6. Option “When Event Ends”: allows to choose an action that will take place after the sales event ends. You can disable a category or products, set products as “Out of stock” or leave your products enabled.
7. Once you configured all the settings – do not forget to save your changes.

Step-by-Step action:

1. Go to “Products” tab > select “Categories” section.
2. Select the required category.
3. Navigate to “Display Settings” tab.
4. Select “Private Sales Homepage” for “Display Mode”.
5. Save your changes by pressing “Save” button.

Step-by-Step action:

This is how Private Sales and Flash Sales Homepage looks like on Magento 2 frontend.

Step-by-Step action:

1. Go to “Products” tab > select “Categories” section.
2. Select the required category.
3. Navigate to “Flash Sale Event” tab.
4. Option “Start Date”: allows admin to set the start date of sale event. Note: you can enter the start date without specifying end date of the flash sale event. In this case the countdown timer will not included to the event.
5. Option “End Date”: allows admin to set the end date of sale event.
6. Option “Email Image”: allows uploading image that will be included into email template.
7. Option ” Event Image”: allows uploading image for the event that will be displayed on the Homepage.
8. Option “Display Products Before Event Starts”: lets you display or hide products before the sales event starts. You can also use the settings that have been previously set up for this category, by selecting “Use Config Settings” button.
9. Option “When Event Ends”: allows admin to select an action that will take place after the sales event ends. You can also use the settings that have been previously set up for this category, by selecting “Use Configuration” button.
10. Option “Private Event”: allows admin to turn a separate Magento 2 category into the private sale event. You can also use the settings that have been previously configured selecting “Use Config Settings” button. Note: If you choose “Yes” option in this field, you will be able to select landing page for this private sale event, visible for all guest visitors.
11. Option “Accessible for Customer Groups”: allows admin to choose the customer group this Private Sale Event will be accessible for.
12. Option “Private Landing Page”: allows admin to display this Landing Page to Customer Groups which haven’t been selected above. Customers without access to this private event will be redirected here.
13. Save your settings by pressing “Save” button.

Step-by-Step action:

1. This is how the flash sale event timer looks like on Category Page of Magento 2 frontend.

Step-by-Step action:

1. This is how the private sale event looks like on Events Page of Magento 2 frontend.

Step-by-Step action:

1. Go to “Products” tab > select “Catalog” section > choose the required product. Go to “Flash Sale Event” tab.
2. Option “Start Date”: allows to set the start date of sale event. Note: you can enter start date without specifying end date of the flash sale event. In this case no countdown timer will be shown.
3. Option “End Date”: allows to set the end date of sale event.
4. Option “Display Product Before Event Starts”: allows to display or hide product before your sales event starts. You can also use the settings, that have been previously set up for this product by selecting “Use Config Settings” button.
5. Option “When Event Ends”: option allows to select the action that will take place after the sales event ends. You can also use the settings that have been previously set up selecting “Use Config Settings” button.
6. Option “Private Event”: allows to turn a separate Magento 2 product into the private sale event. You can also use the settings that have been previously configured for a parent category by selecting “Use Parent Category Settings” button. Note: If you choose “Yes” option in this field, you will be able to select landing page for this private sale event, visible for all guest visitors.
7. Option “Accessible for Customer Groups”: allows admin to choose the customer group this Private Sale Event will be accessible for.
8. Option “Private Landing Page”: allows admin to display this Landing Page to Customer Groups which haven’t been selected above. Customers without access to this private event will be redirected here.
9. Save your changes by pressing “Save” button.

Step-by-Step action:

1. This is how the flash sale event timer looks like on Product Page on Magento frontend.

Step-by-Step action:

1. Go to the required category, configure ” Flash Sale Event” tab and press the ” Preview” button.

Step-by-Step action:

1. This is the notification of the preview mode.
2. If you choose the date here, you will be able to see how exactly the category will look like on the specified date.
3. Press “Exit preview”, in order to exit the preview mode.

Step-by-Step action:

1. Click on the “Plumrocket” tab in main menu.
2. Go to “Private Sales and Flash Sales” tab.
3. Select “Splash Page”.

Detailed description:

1. Click on the “General” tab to access the settings.
2. Option “Enable Splash Page”: enables or disables the Splash Page. Once the Splash is enabled, the users will only be able to access your website after registration.

Detailed description:

1. Click on the “General” tab to access the settings.
2. Option “Enable Splash Page”: enables or disables the Splash Page. Once the Splash is disabled, the users will be able to access your website without registration.

Detailed description:

1. Go to “General” tab > select “User Registration” option to access the settings.
2. Option “User Registrations” enables or disables registration at the website. If the registration is enabled, the users will be able to use the “Sign Up” link on the Splash page to get registered.

Detailed description:

1. Go to “General” tab > select “User Registration” option to access the settings.
2. Option “User Registrations” enables or disables user registration. If the registration is disabled – users will not be able to use the “Sign Up” link on the Splash page to get registered (the link will disappear).

Detailed description:

1. Go to “General” tab to access the settings.
2. Option “Launching Soon” enables or disable the mode. If the Launching Soon Mode is enabled, the users will only see the registration form and the “Submit Registration” button on the Splash Page. The “Log in” form will be visually unavailable.
3. Option “Launching Soon Registration Confirmation Text’: Website administrator can edit the text that appears after successful registration when the website functions in the Launching Soon Mode. As a rule, this text block contains brief information concerning the purpose and the opening date of the website.

Detailed description:

1. Go to “General” tab to access the settings.
2. Option “Launching Soon” enables or disables the mode. If the “Launching Soon” mode is disabled, the users will be able to log in after successful registration. The registration and login forms will be available to all users.

Detailed description:

1. Go to “Meta Data” tab to access the settings.
2. Option “Meta Title”: enter the meta title of the Splash page.
3. Option “Meta Keywords”: enter the meta keywords for the Splash page here.
4. Option “Meta Description”: provide short meta description for the Splash page in this field.
5. Save your changes by pressing “Save and Continue Edit” button.

Detailed description:

1. Go to “Background Images” tab to access the settings.
2. Option “Browse File”: this button launches the interface to upload new images. Recommended width of picture: 2000px .
3. Option “Sort Order”: the parameters determining the sequence of images are set in this field.
4. Option “Active From”: sets the starting date of the image display. If it is set by default (00/00/00) – the image will be permanently displayed on the Splash page.
5. Option “Active To”: sets the ending date of the image display. If it is set by default (00/00/00) – the image will be permanently displayed on the Splash page.
6. Option “Exclude”: allows you to temporarily exclude the image from the list, not showing it on the website.
7. Option “Remove”: deletes the image.
8. Press “Save” button to save your changes.

Step-by-Step action:

1. Click on the “Plumrocket” tab in main menu.
2. Go to “Private Sales and Flash Sales” tab > select “Newsletter Templates”.

Step-by-Step action:

1. Click on the “Add New” button to create Newsletter Template.
2. Column “Name” indicates the Newsletter Template name.
3. You can delete the selected Newsletter Template by choosing “Delete” action.
4. You can submit your action by clicking on “Submit” button.

Step-by-Step action:

1. Indicate your Newsletter Template name.
2. Select the store view for your Newsletter Template.
3. Set the Newsletter sending date and time. Note: Setting the date will load all the events which will be active at the date and time of sending.
4. Select the events that you want to display in the Newsletter.

Step-by-Step action:

1. Indicate your Newsletter title.
2. Indicate the active events date range in the “Period” field. There are 2 possible options here: a) You can set the date range manually; b)You can leave this field empty. In this case the system will pick up the start date of first active selected event, and the end date of the last active selected event and paste these dates into the field.
3. Insert your own full Email Template here. You can use provided variables if needed. Note: In case you don’t have your own Email Template – there are 5 built-in email templates.

Step-by-Step action:

1. Choose the needed layout for the template from the drop-down.
2. Insert your own Email Template here. Note: In case you don’t have your own Template – there are 5 built-in email templates.
3. Indicate the “Date Format” for start and end dates of your events.
4. Click the “Save” button to save your changes. Note: It is required to save your changes in order for “Preview” and “Generate” buttons to appear.

Step-by-Step action:

1. Click the “Preview” button to see how your Newsletter Template will appear in the email.

Step-by-Step action:

1. This is an example of how default Newsletter Template can look like in the email.

Step-by-Step action:

1. Click the “Generate HTML” button to generate the Newsletter Template in form of HTML code.

Step-by-Step action:

1. This is an example of the default Newsletter Template HTML code generated by the system for pasting into your email sending system (e.g. MailChimp).